SPS-Darts 2006 logo


The second annual
IEEE BENELUX/DSP Valley Signal Processing Symposium

March 28-29, 2006

Metropolis, Antwerp, Belgium


IEEE logo

Benelux Signal
Processing Chapter

EMB logo

Benelux Engineering in Medicine
and Biology Chapter

SPS-DARTS 2006 Paper Submission


Many of the following instructions apply only to the paper submissions for the research track.

For contributers to the industrial track, submitting a full paper is optional. However, contributers to the industrial track should (at least) submit an ascii-abstract on the website, as detailed in step 3.

The SPS-DARTS 2006 paper submission and review process is being conducted in a manner similar to that of the ICASSP conferences (in fact the guidelines below were strongly inspired by those of ICASSP 2002):

The review process is being conducted entirely online. To make the review process easy for the reviewers, and to assure that the paper submissions will be readable through the online review system, we ask that authors submit paper documents that are formatted according to the Paper Kit instructions below.


Authors are required to complete the procedures in the following list before the specified deadlines. Detailed guidelines for each of these procedures are provided below. Authors are responsible for making sure that their papers are properly submitted for the review process.
  1. Complete a properly formatted paper document.
  2. Submit the paper electronically on the SPS-DARTS 2006 website.
  3. Check the website for the status of your paper.
  4. Prepare a lecture presentation.
Please make sure to include the paper number that is assigned to you on all correspondence.

Additional questions regarding submission of papers should be directed to sps2006@acivs.org.

STEP 1: Complete a properly formatted paper document.

Use the following guidelines when preparing your document:

Electronic format: As the papers will be reproduced electronically, you must submit your paper either in pdf, or in a format that we can convert to pdf. Acceptable formats include pdf, postscript, MSword and LaTeX. Please use the templates provided on this website. If you cannot submit your paper in one of these formats please contact sps2006@acivs.org for further instructions.

Length: You are allowed a total of 4-6 pages for your document. Papers that deviate too much from our guidelines will be returned to the authors. They will be reviewed only after they satisfy our requirements to a minimal degree.

Language: All proposals must be in English.

Margins: Documents should be formatted for standard A4-size paper. Any text or other material outside the margins specified below will not be accepted:

Typeface: To achieve the best viewing experience for the review process and conference proceedings, we strongly encourage authors to use Times-Roman font. If a font face is used that is not recognized by the submission system, your proposal will not be reproduced correctly. We recommend a font size of 10-point for the main text. In any case, use a font size that is no smaller than 9 points throughout the proposal, including figure captions. In 9-point type font, capital letters are 2 mm high. For 9-point type font, there should be no more than 3.2 lines/cm (8 lines/inch) vertically. This is a minimum spacing; 2.75 lines/cm (7 lines/inch) will make the proposal much more readable. Larger type sizes require correspondingly larger vertical spacing.

Title: The paper title has to appear in boldface CAPITAL letters. The authors' name(s) and affiliation(s) appear below the title in capital and lower case letters. Proposals with multiple authors and affiliations may require two or more lines for this information.

Abstract: Each paper should contain an abstract of 100 to 200 words that appears at the beginning of the document.

Body: Major headings appear in boldface CAPITAL letters, centered in the column. Subheadings appear in capital and lower case, in boldface. They start at the left margin of the column on a separate line. Sub-subheadings are discouraged, but if they must be used, they should appear in capital and lower case, and start at the left margin on a separate line. They may be underlined or in italics.

References: List and number all references at the end of the document. The references can be numbered in alphabetical order or in order of appearance in the paper. When referring to them in the text, type the corresponding reference number in square brackets as shown at the end of this sentence [1]. The end of the document should include a list of references containing information similar to the following example:

[1] D. E. Ingalls, "Image Processing for Experts," IEEE Trans. ASSP, vol. ASSP-36, pp. 1932-1948, 1988.

Illustrations & color: Illustrations must appear within the designated margins. They may span the two columns. If possible, position illustrations at the top of columns, rather than in the middle or at the bottom. Caption and number every illustration. All halftone illustrations must be clear in black and white. Since readers may print your paper in black and white, be sure that your images are acceptable when printed in black and white (the CDROM proceedings will show the colors in your document).

Page numbers: Do not put page numbers on your document. We will add appropriate page numbers to accepted papers when the conference proceedings are assembled.

The following style files and templates are available for users of LaTeX and Microsoft Word:

We recommend that you use the LaTeX files (first choice) or the MSWord file (second choice) to produce your document, since they have been set up to meet the formatting guidelines listed above. When using these files, double-check the paper size in your page setup to make sure you are using the A4 paper layout. The LaTeX environment files specify suitable margins, page layout, text, and a bibliography style. Although this environment has been extensively tested, there may be rare instances when it is not fully robust.

STEP 2: Prepare a Postscript or Pdf version.

The review process will be performed from the electronic submission of your paper. To ensure that your document is compatible with the review system, please adhere to the following compatibility requirements:

File Format

Papers must be submitted in either PostScript or PDF format. These submissions must be formatted to A4 page size, and in first-page-first order. Please verify that the final version of your PostScript or PDF file prints correctly to a PostScript printer before submission. Documents that do not print correctly cannot be reviewed. For best results, authors should avoid the use of custom half tones, bitmap pattern fills, and bitmap fonts. Use standard half tones and solid color or grey fills instead. The paper submission and publication system will use Adobe's Portable Document Format (PDF). If you are able to create a PDF file yourself, you are encouraged to do so. Since reviewers will be viewing a PDF version of your paper, translation errors will be minimized by your submission of a PDF instead of a PostScript, resulting in the best possible rendering of your document. Be sure that you embed all fonts that are used when you create the PostScript or PDF file. For best PDF document quality, you may want to read Adobe's recommendations for generating PostScript and PDF files.

LaTeX Users: Generating a PostScript file is straightforward for all LaTeX packages we are aware of. When preparing the proposal under LaTeX, it is preferable to use scalable fonts such as Type I, Computer Modern. However, quite good results can be also obtained with the fonts defined in the style file, provided that you generate postscript using one of the following techniques:

Windows users: To save a document as a PostScript file:

Macintosh users: To save a document as a PostScript file:

File Size Limit

Authors will be permitted to submit a pdf-document file up to 8 Mbyte (megabyte) in size. To request an exception, contact us at sps2006@acivs.org.

STEP 3: Submit your paper on the SPS-DARTS 2006 website.

All SPS-DARTS 2006 papers must be submitted in electronic format. Please use our author paper submission page and follow the procedure outlined there.

Authors of papers in the research track musy submit both a short ascii-abstract and a full paper in pdf-format. Authors of papers in the industrial track are not required to submit a full paper (although they are allowed to do so).

If for some reason the submission web-site does not work for you, we kindly request you to inform us of the problem. We will try to solve it within the shortest possible delay.

We prefer not to receive paper submissions by email. However, if for some reason you are unable to use the submission system, you can also send your paper submission by email. In this case, include the abstract of the paper and the names of all the authors in ascii-format in the main body of the email and attach the electronic documents to the message.

If you require furher assistance, please do not hesitate to contact us at sps2006@acivs.org.

STEP 4: The review process

Pre-Review Process

Your submitted paper will be converted to PDF format if necessary, and then visually inspected to assure that the document is readable and meets the basic formatting requirements. If we encounter errors with your submitted file, we will contact you to resolve the issue. If your paper passes the initial inspection, it will be entered into the review process.

The review process

Your paper will be reviewed by at least two reviewers. The reviewers will be selected based on the title and abstract of your paper. The reviewers will base their advise on the full paper, which they can access on our website.

Notification of acceptance

When the review process is finished, you will be notified by email of the outcome for your paper(s). You will the be able to view the review reports for your papers on the author abstracts page of our website, which will require you to login with the username and password which you selected when you submitted your paper(s). The acceptance email will also contain detailed instructions on how to access the review reports.

STEP 5: Final cameraready paper submission

The cameraready paper

The reviewers of your paper may have pointed out small errors and omissions in your paper or have made suggestions for improvements. The editor of the conference proceedings may also have pointed out problems with the layout of your paper. These comments can be accessed on the website (after logging in).

Please take these remarks into account when preparing your final paper. Also observe the paper requirements outlined above. In order to meet these requirements, it is essential that you use the templates provided on this website.

Submission of the cameraready paper

You can submit your cameraready papers using the submit cameraready paper page on out website (login required) and follow the procedure outlined there. In particular, you will be asked to update your abstracts and to submit pdf (or ps) versions of your paper and source documents (LaTeX or MsWord).

Register for the Conference

At least one author must register and attend the conference in order for your paper to be published on the conference cdrom. You can register using the online registration form on the conference website.

If you are a SPS-DARTS 2006 author you should select the option "I already have an account" on the form. This option will let you login and will speed up the registration procedure by not asking you to re-enter information which you have already entered when submitting your paper.

The form will ask you to select the appropriate conference fee and to select the social activities you wish to attend.

At the end of the registration, you will receive instructions on how to pay the conference fee.

Proof of payment

You will receive a proof of payment when you pick up your conference cdrom, bag, ... at the conference registration desk. If you require a written proof of payment sooner than that, or if you need an official invoice, please contact us by email at sps2006@acivs.org.

Copyright Issues

By submitting a camera ready paper, you agree to transfer the copyrights for your paper to SPS-DARTS 2006 to the extent that is needed to publish the conference proceedings as a whole, both on cdrom and in book form (in case SPS-DARTS 2006 decided to publish paper proceedings at a later date).

You also agree not to publish the paper "as is" in the proceedings of other conferences or in scientific journals, or as part of a book, or as part of an on-line, journal, with the following exeptions

STEP 6: Prepare your lecture or poster presentation.

Please verify whether your paper has been accepted for oral or poster presentation and observe the relevant guidelines:

This software generating these pages is © (not Ghent University), 2002-2017. All rights reserved.

The data on this page is © SPS-DARTS 2006. All rights reserved.

The server hosting this website is owned by the department of Telecommunications and Information Processing (TELIN) of Ghent University.

Problems with the website should be reported to .

This page was generated on Friday September 22nd, 2017 20:48:33.